Tag Archives: RedisGraph

RedisGraph Session at RedisConf 2020 Takeaway

April 16, 2020 Gigi Leave a comment

Image Source: Important Announcement: RedisConf 2020 is Now a Virtual Event

RedisConf 2020 was originally planned to be held in San Francisco. The sudden spread of the COVID19 pandemic, however, meant that the organisers, like many others, had to take a step back and reconsider whether and how to run this event. In fact, the decision was taken in March for it to be held as a virtual event.

RedisConf 2020 will thus be an online conference taking place on the 12th and 13th of May 2020. The schedule is packed with talks, the first day being breakout sessions, and the second being full of training provided by the folks at Redis Labs.

Among the talks presented on the first day, you’ll find my own A Practical Introduction to RedisGraph, which introduces the relatively new RedisGraph graph database, and demonstrates what you can do with it via practical demonstration.

If you’d like to learn more about RedisGraph, check out also my two articles, First Steps with RedisGraph and Family Tree with RedisGraph, published last November.

Software, Software development

Family Tree with RedisGraph

November 17, 2019 Gigi 2 Comments

In “First Steps with RedisGraph“, after getting up and running, we used a couple of simple graphs to understand what we can do with Cypher and RedisGraph.

This time, we will look at a third and more complex example: building and querying a family tree.

The ancient *Family Tree 2.0* application for Windows 95.

For me, this not just an interesting example, but a matter of personal interest and the reason why I am learning graph databases in the first place. In 2001, I came upon a Family Tree application from the Windows 95 era, and gradually built out my family tree. By the time I realised that it was getting harder to run with each new version of Windows, it was too big to easily and reliably migrate all the data to a new system. Fortunately, Linux is more capable of running this software than Windows.

This software, and others like it, allow you to do a number of things. The first and most obvious is data entry (manually or via an import function) in order to build the family tree. Other than that, they also allow you to query the structure of the family tree, bringing out visualisations (such as descendant trees, ancestor trees, chronological trees etc), statistics (e.g. average age at marriage, life expectancy, average number of children, etc), and answers to simple questions (e.g. who died in 1952?).

An Example Family Tree

In order to have something we can play with, we’ll use this family tree:

This is the example family tree that we will use throughout this article.

This data is entirely fictitious, and while it is a non-trivial structure, I would like to point out a priori several assumptions and design decisions that I have taken in order to keep the structure simple and avoid getting lost in the details of this already lengthy article:

All children are the result of a marriage. Obviously, this is not necessarily the case in real life.
All marriages are between a husband and a wife. This is also not necessarily the case in real life. Note that this does not exclude that a single person may be married multiple times.
When representing dates, we are focusing only on the year in order to avoid complicating things with date arithmetic. In reality, family tree software should not just cater for full dates, but also for dates where some part is unknown (e.g. 1896-01-??).
Parent-child relationships are represented as childOf arrows, from the child to each parent. This approach is quite different from others you might come across (such as those documented by Rik Van Bruggen). It allows us to maintain a simple structure while not duplicating any information (because the year of birth is stored with the child).
A man marries a woman. In reality, it should be a bidirectional relationship, but we cannot have that in RedisGraph without having two relationships in opposite directions. Having the relationship go in a single direction turns out to be enough for the queries we need, so there is no need to duplicate that information. The direction was chosen arbitrarily and if anyone feels offended, you are more than welcome to reverse it.

Loading Data in RedisGraph

As we’re now dealing with larger examples, it is not very practical to interactively type or paste the RedisGraph commands into redis-cli to insert the data we need. Instead, we can prepare a file containing the commands we want to execute, and then pipe it into redis-cli as follows:

cat familytree.txt | redis-cli --pipe

In our case, you can get the commands to create the example family tree either from the Gigi Labs BitBucket Repository (look for RedisGraph-FamilyTree/familytree.txt) or in the code snippet below:

GRAPH.QUERY FamilyTree "CREATE (:Person {name: 'John', gender: 'm', born: 1932, died: 1982})"
GRAPH.QUERY FamilyTree "CREATE (:Person {name: 'Victoria', gender: 'f', born: 1934, died: 2006})"
GRAPH.QUERY FamilyTree "CREATE (:Person {name: 'Joseph', gender: 'm', born: 1958})"
GRAPH.QUERY FamilyTree "CREATE (:Person {name: 'Christina', gender: 'f', born: 1957, died: 2018})"
GRAPH.QUERY FamilyTree "CREATE (:Person {name: 'Donald', gender: 'm', born: 1984})"
GRAPH.QUERY FamilyTree "CREATE (:Person {name: 'Eleonora', gender: 'f', born: 1986, died: 2010})"
GRAPH.QUERY FamilyTree "CREATE (:Person {name: 'Nancy', gender: 'f', born: 1982})"
GRAPH.QUERY FamilyTree "CREATE (:Person {name: 'Anthony', gender: 'm', born: 2010})"
GRAPH.QUERY FamilyTree "CREATE (:Person {name: 'George', gender: 'm', born: 2012})"
GRAPH.QUERY FamilyTree "CREATE (:Person {name: 'Antoinette', gender: 'f', born: 1967})"
GRAPH.QUERY FamilyTree "CREATE (:Person {name: 'Alfred', gender: 'm', born: 1965})"
GRAPH.QUERY FamilyTree "CREATE (:Person {name: 'Bernard', gender: 'm', born: 1997})"
GRAPH.QUERY FamilyTree "CREATE (:Person {name: 'Fiona', gender: 'f', born: 2000})"

GRAPH.QUERY FamilyTree "MATCH (man:Person { name : 'John' }), (woman:Person { name : 'Victoria' }) CREATE (man)-[:married { year: 1956 }]->(woman)"
GRAPH.QUERY FamilyTree "MATCH (man:Person { name : 'Joseph' }), (woman:Person { name : 'Christina' }) CREATE (man)-[:married { year: 1981 }]->(woman)"
GRAPH.QUERY FamilyTree "MATCH (man:Person { name : 'Donald' }), (woman:Person { name : 'Eleonora' }) CREATE (man)-[:married { year: 2008 }]->(woman)"
GRAPH.QUERY FamilyTree "MATCH (man:Person { name : 'Donald' }), (woman:Person { name : 'Nancy' }) CREATE (man)-[:married { year: 2011 }]->(woman)"
GRAPH.QUERY FamilyTree "MATCH (man:Person { name : 'Alfred' }), (woman:Person { name : 'Antoinette' }) CREATE (man)-[:married { year: 1992 }]->(woman)"

GRAPH.QUERY FamilyTree "MATCH (child:Person { name : 'Joseph' }), (parent:Person { name : 'John' }) CREATE (child)-[:childOf]->(parent)"
GRAPH.QUERY FamilyTree "MATCH (child:Person { name : 'Joseph' }), (parent:Person { name : 'Victoria' }) CREATE (child)-[:childOf]->(parent)"
GRAPH.QUERY FamilyTree "MATCH (child:Person { name : 'Donald' }), (parent:Person { name : 'Joseph' }) CREATE (child)-[:childOf]->(parent)"
GRAPH.QUERY FamilyTree "MATCH (child:Person { name : 'Donald' }), (parent:Person { name : 'Christina' }) CREATE (child)-[:childOf]->(parent)"
GRAPH.QUERY FamilyTree "MATCH (child:Person { name : 'Anthony' }), (parent:Person { name : 'Donald' }) CREATE (child)-[:childOf]->(parent)"
GRAPH.QUERY FamilyTree "MATCH (child:Person { name : 'Anthony' }), (parent:Person { name : 'Eleonora' }) CREATE (child)-[:childOf]->(parent)"
GRAPH.QUERY FamilyTree "MATCH (child:Person { name : 'George' }), (parent:Person { name : 'Donald' }) CREATE (child)-[:childOf]->(parent)"
GRAPH.QUERY FamilyTree "MATCH (child:Person { name : 'George' }), (parent:Person { name : 'Nancy' }) CREATE (child)-[:childOf]->(parent)"
GRAPH.QUERY FamilyTree "MATCH (child:Person { name : 'Antoinette' }), (parent:Person { name : 'John' }) CREATE (child)-[:childOf]->(parent)"
GRAPH.QUERY FamilyTree "MATCH (child:Person { name : 'Antoinette' }), (parent:Person { name : 'Victoria' }) CREATE (child)-[:childOf]->(parent)"
GRAPH.QUERY FamilyTree "MATCH (child:Person { name : 'Bernard' }), (parent:Person { name : 'Alfred' }) CREATE (child)-[:childOf]->(parent)"
GRAPH.QUERY FamilyTree "MATCH (child:Person { name : 'Bernard' }), (parent:Person { name : 'Antoinette' }) CREATE (child)-[:childOf]->(parent)"
GRAPH.QUERY FamilyTree "MATCH (child:Person { name : 'Fiona' }), (parent:Person { name : 'Alfred' }) CREATE (child)-[:childOf]->(parent)"
GRAPH.QUERY FamilyTree "MATCH (child:Person { name : 'Fiona' }), (parent:Person { name : 'Antoinette' }) CREATE (child)-[:childOf]->(parent)"

There are certainly other ways in which the above commands could be rewritten to be more compact, but I wanted to focus more on keeping things readable in this case.

Sidenote: When creating the nodes (not the relationships), another option could be to keep only the JSON-like property structure in a file (see RedisGraph-FamilyTree/familytree-persons.txt), and then use awk to generate the beginning and end of each command:

awk '{print "GRAPH.QUERY FamilyTree \"CREATE (:Person " $0 ")\""}' familytree-persons.txt | redis-cli --pipe

Querying the Family Tree

Once the family tree data has been loaded, we can finally query it and get some meaningful information. You might want to keep the earlier family tree picture open in a separate window while you read on, to help you follow along.

First, let’s list all individuals:

GRAPH.QUERY FamilyTree "MATCH (x) RETURN x.name"
1) 1) "x.name"
2)  1) 1) "John"
    2) 1) "Victoria"
    3) 1) "Joseph"
    4) 1) "Christina"
    5) 1) "Donald"
    6) 1) "Eleonora"
    7) 1) "Nancy"
    8) 1) "Anthony"
    9) 1) "George"
   10) 1) "Antoinette"
   11) 1) "Alfred"
   12) 1) "Bernard"
   13) 1) "Fiona"
3) 1) "Query internal execution time: 0.631002 milliseconds"

Next, we’ll use the ORDER BY clause to get a chronological report based on the year people were born:

GRAPH.QUERY FamilyTree "MATCH (x) RETURN x.name, x.born ORDER BY x.born"
1) 1) "x.name"
   2) "x.born"
2)  1) 1) "John"
       2) (integer) 1932
    2) 1) "Victoria"
       2) (integer) 1934
    3) 1) "Christina"
       2) (integer) 1957
    4) 1) "Joseph"
       2) (integer) 1958
    5) 1) "Alfred"
       2) (integer) 1965
    6) 1) "Antoinette"
       2) (integer) 1967
    7) 1) "Nancy"
       2) (integer) 1982
    8) 1) "Donald"
       2) (integer) 1984
    9) 1) "Eleonora"
       2) (integer) 1986
   10) 1) "Bernard"
       2) (integer) 1997
   11) 1) "Fiona"
       2) (integer) 2000
   12) 1) "Anthony"
       2) (integer) 2010
   13) 1) "George"
       2) (integer) 2012
3) 1) "Query internal execution time: 0.895734 milliseconds"

By adding in a WHERE clause, we can retrieve all those born before 1969, and return them in order of year of birth as in the previous query:

GRAPH.QUERY FamilyTree "MATCH (x) WHERE x.born < 1969 RETURN x.name, x.born ORDER BY x.born"
1) 1) "x.name"
   2) "x.born"
2) 1) 1) "John"
      2) (integer) 1932
   2) 1) "Victoria"
      2) (integer) 1934
   3) 1) "Christina"
      2) (integer) 1957
   4) 1) "Joseph"
      2) (integer) 1958
   5) 1) "Alfred"
      2) (integer) 1965
   6) 1) "Antoinette"
      2) (integer) 1967
3) 1) "Query internal execution time: 1.097382 milliseconds"

EXISTS allows us to check whether a property is set. Using it with the died property, we can list all the people who died:

GRAPH.QUERY FamilyTree "MATCH (x) WHERE EXISTS(x.died) RETURN x.name"
1) 1) "x.name"
2) 1) 1) "John"
   2) 1) "Victoria"
   3) 1) "Christina"
   4) 1) "Eleonora"
3) 1) "Query internal execution time: 0.936778 milliseconds"

By changing that to NOT EXISTS, we can get the opposite, i.e. all the people who are still alive:

GRAPH.QUERY FamilyTree "MATCH (x) WHERE NOT EXISTS(x.died) RETURN x.name"
1) 1) "x.name"
2) 1) 1) "Joseph"
   2) 1) "Donald"
   3) 1) "Nancy"
   4) 1) "Anthony"
   5) 1) "George"
   6) 1) "Antoinette"
   7) 1) "Alfred"
   8) 1) "Bernard"
   9) 1) "Fiona"
3) 1) "Query internal execution time: 1.150569 milliseconds"

Next, let’s answer some questions about specific individuals.

When did Christina die?

GRAPH.QUERY FamilyTree "MATCH (x) WHERE x.name = 'Christina' RETURN x.died ORDER BY x.born"
1) 1) "x.died"
2) 1) 1) (integer) 2018
3) 1) "Query internal execution time: 0.948734 milliseconds"

Who is George’s mother?

GRAPH.QUERY FamilyTree "MATCH (c)-[:childOf]->(p) WHERE c.name = 'George' AND p.gender = 'f' RETURN p.name"
1) 1) "p.name"
2) 1) 1) "Nancy"
3) 1) "Query internal execution time: 1.859084 milliseconds"

At what age did Eleonora get married? Note here that we’re using the AS keyword to change the title of the returned field (just like in SQL):

GRAPH.QUERY FamilyTree "MATCH (m)-[r:married]->(f) WHERE f.name = 'Christina' RETURN r.year - f.born AS AgeAtMarriage"
1) 1) "AgeAtMarriage"
2) 1) 1) (integer) 24
3) 1) "Query internal execution time: 1.442386 milliseconds"

How many children did Alfred have? In this case, we use the COUNT() aggregate function. Again, it works just like in SQL:

GRAPH.QUERY FamilyTree "MATCH (c)-[:childOf]->(p) WHERE p.name = 'Alfred' RETURN COUNT(c)"
1) 1) "COUNT(c)"
2) 1) 1) (integer) 2
3) 1) "Query internal execution time: 1.305086 milliseconds"

Let’s get all of Anthony’s ancestors! Here we use the *1.. syntax to indicate that this is not a single relationship, but indeed a path that is made up of one or more hops.

GRAPH.QUERY FamilyTree "MATCH (c)-[:childOf*1..]->(p) WHERE c.name = 'Anthony' RETURN p.name"
1) 1) "p.name"
2) 1) 1) "Eleonora"
   2) 1) "Donald"
   3) 1) "Christina"
   4) 1) "Joseph"
   5) 1) "Victoria"
   6) 1) "John"
3) 1) "Query internal execution time: 1.456897 milliseconds"

How about Victoria’s descendants? This is the same as the ancestors query in terms of the MATCH clause, but it’s got the WHERE and RETURN parts swapped.

GRAPH.QUERY FamilyTree "MATCH (c)-[:childOf*1..]->(p) WHERE p.name = 'Victoria' RETURN c.name"
1) 1) "c.name"
2) 1) 1) "Antoinette"
   2) 1) "Fiona"
   3) 1) "Bernard"
   4) 1) "Joseph"
   5) 1) "Donald"
   6) 1) "George"
   7) 1) "Anthony"
3) 1) "Query internal execution time: 1.158366 milliseconds"

Can we get Donald’s ancestors and descentants using a single query? Yes! We can use the UNION operator to combine the ancestors and descentants queries. Note that in this case the AS keyword is required, because subqueries of a UNION must have the same column names.

GRAPH.QUERY FamilyTree "MATCH (c)-[:childOf*1..]->(p) WHERE c.name = 'Donald' RETURN p.name AS name UNION MATCH (c)-[:childOf*1..]->(p) WHERE p.name = 'Donald' RETURN c.name AS name"
1) 1) "name"
2) 1) 1) "Christina"
   2) 1) "Joseph"
   3) 1) "Victoria"
   4) 1) "John"
   5) 1) "George"
   6) 1) "Anthony"
3) 1) "Query internal execution time: 78.088850 milliseconds"

Who are Donald’s cousins? This is a little more complicated because we need two paths that feed into the same parent, exactly two hops away (because one hop away would be siblings). We also need to exclude Donald and his siblings (if he had any) because they could otherwise match the specified pattern.

GRAPH.QUERY FamilyTree "MATCH (c1:Person)-[:childOf]->(p1:Person)-[:childOf]->(:Person)<-[:childOf]-(p2:Person)<-[:childOf]-(c2:Person) WHERE p1 <> p2 AND c1.name = 'Donald' RETURN c2.name"
1) 1) "c2.name"
2) 1) 1) "Bernard"
   2) 1) "Fiona"
3) 1) "Query internal execution time: 2.133173 milliseconds"

Update 4th December 2019: The ancestors and descendants query has been added, and the cousins query improved, thanks to the contributions of people in this GitHub issue. Thank you!

Statistical Queries

The last two queries I’d like to show are statistical in nature, and since they’re not easy to visualise directly, I’d like to get to them in steps.

First, let’s calculate life expectancy. In order to understand this, let’s first run a query retrieving the year of birth and death of those people who are already dead:

GRAPH.QUERY FamilyTree "MATCH (x) WHERE EXISTS(x.died) RETURN x.born, x.died"
1) 1) "x.born"
   2) "x.died"
2) 1) 1) (integer) 1932
      2) (integer) 1982
   2) 1) (integer) 1934
      2) (integer) 2006
   3) 1) (integer) 1957
      2) (integer) 2018
   4) 1) (integer) 1986
      2) (integer) 2010
3) 1) "Query internal execution time: 1.066981 milliseconds"

Since life expectancy is the average age at which people die, then for each of those born/died pairs, we need to subtract born from died to get the age at death for each person, and then average them out. We can do this using the AVG() aggregate function, which like COUNT() may be reminiscent of SQL.

GRAPH.QUERY FamilyTree "MATCH (x) WHERE EXISTS(x.died) RETURN AVG( x.died - x.born )"
1) 1) "AVG( x.died - x.born )"
2) 1) 1) "51.75"
3) 1) "Query internal execution time: 1.208347 milliseconds"

The second statistic we’ll calculate is the average age at marriage. This is similar to life expectancy, except that in this case there are two people in each marriage, which complicates things slightly.

Once again, let’s visualise the situation first, by retrieving separately the ages of the female and the male when they got married:

GRAPH.QUERY FamilyTree "MATCH (m)-[r:married]->(f) RETURN r.year - f.born, r.year - m.born"
1) 1) "r.year - f.born"
   2) "r.year - m.born"
2) 1) 1) (integer) 22
      2) (integer) 24
   2) 1) (integer) 24
      2) (integer) 23
   3) 1) (integer) 22
      2) (integer) 24
   4) 1) (integer) 29
      2) (integer) 27
   5) 1) (integer) 25
      2) (integer) 27

Therefore, we have five marriages but ten ages at marriage, which is a little confusing to work out an average. However, we can still get to the number we want by adding up the ages for each couple, working out the average, and then dividing by 2 at the end to make up for the difference in the number of values:

GRAPH.QUERY FamilyTree "MATCH (m)-[r:married]->(f) RETURN AVG( (r.year - f.born) + (r.year - m.born) ) / 2"
1) 1) "AVG( (r.year - f.born) + (r.year - m.born) ) / 2"
2) 1) 1) "24.7"
3) 1) "Query internal execution time: 48.874147 milliseconds"

Wrapping Up

We’ve seen another example graph — a family tree — in this article. We discussed the reasons behind the chosen representation, delved into efficient ways to quickly create it from a text file, and then ran a whole bunch of queries to answer different questions and analyse the data in the family tree.

One thing I’m still not sure how to do is whether it’s possible, given two people, to identify their relationship (e.g. cousin, sibling, parent, etc) based on the path between them.

As all this is something I’m still learning, I’m more than happy to receive feedback on how to do things better and perhaps other things you can do which I’m not even aware of.

Software, Software development

First Steps with RedisGraph

November 9, 2019 Gigi 3 Comments

RedisGraph is a super-fast graph database, and like others of its kind (such as Neo4j), it is useful to represent networks of entities and their relationships. Examples include social networks, family trees, and organisation charts.

Getting Started

The easiest way to try RedisGraph is using Docker. Use the following command, which is based on what the Quickstart recommends but instead uses the edge tag, which would have the latest features and fixes:

sudo docker run -p 6379:6379 -it --rm redislabs/redisgraph:edge

You will also need the redis-cli tool to run the example queries. On Ubuntu (or similar), you can get this by installing the redis-tools package.

Tom Loves Judy

We’ll start by representing something really simple: Tom Loves Judy.

We can create this graph using a single command:

GRAPH.QUERY TomLovesJudy "CREATE (tom:Person {name: 'Tom'})-[:loves]->(judy:Person {name: 'Judy'})"

When using redis-cli, queries will also follow the format of GRAPH.QUERY <key> "<cypher_query>". In RedisGraph, a graph is stored in a Redis key (in this case called “TomLovesJudy“) with the special type graphdata, thus this must always be specified in queries. The query itself is the part between double quotes, and uses a language called Cypher. Cypher is also used by Neo4j among other software, and RedisGraph implements a subset of it.

Cypher represents nodes and relationships using a sort of ASCII art. Nodes are represented by round brackets (parentheses), and relationships are represented by square brackets. The arrow indicates the direction of the relationship. RedisGraph at present does not support undirected relationships. When you run the above command, Redis should provide some output indicating what happened:

2 nodes and one relationship. Makes sense.

Since our graph has been created, we can start running queries against it. For this, we use the MATCH keyword:

GRAPH.QUERY TomLovesJudy "MATCH (x) RETURN x"

Since round brackets represent a node, here we’re saying that we want the query to match any node, which we’ll call x, and then return it. The output for this is quite verbose:

1) 1) "x"
2) 1) 1) 1) 1) "id"
            2) (integer) 0
         2) 1) "labels"
            2) 1) "Person"
         3) 1) "properties"
            2) 1) 1) "name"
                  2) "Tom"
   2) 1) 1) 1) "id"
            2) (integer) 1
         2) 1) "labels"
            2) 1) "Person"
         3) 1) "properties"
            2) 1) 1) "name"
                  2) "Judy"
3) 1) "Query internal execution time: 61.509847 milliseconds"

As you can see, this has given us the whole structure of each node. If we just want to get something specific, such as the name, then we can specify it in the RETURN clause:

GRAPH.QUERY TomLovesJudy "MATCH (x) RETURN x.name"
1) 1) "x.name"
2) 1) 1) "Tom"
   2) 1) "Judy"
3) 1) "Query internal execution time: 0.638126 milliseconds"

We can also query based on relationships. Let’s see who loves who:

GRAPH.QUERY TomLovesJudy "MATCH (x)-[:loves]->(y) RETURN x.name, y.name"
1) 1) "x.name"
   2) "y.name"
2) 1) 1) "Tom"
      2) "Judy"
3) 1) "Query internal execution time: 54.642536 milliseconds"

It seems like Tom Loves Judy. Unfortunately, Judy does not love Tom back.

Company Shareholding

Let’s take a look at a slightly more interesting example.

Company A is owned by individuals X (85%) and Y (15%). Company B is owned by individuals Y (55%) and Z (45%).

In this graph, we have companies (blue nodes) which are owned by multiple individuals (red nodes). We can’t create this as a single command as we did before. We also can’t simply issue a series of CREATE commands, because we may end up creating multiple nodes with the same name.

Instead, let’s create all the nodes separately first:

GRAPH.QUERY Companies "CREATE (:Individual {name: 'X'})"
GRAPH.QUERY Companies "CREATE (:Individual {name: 'Y'})"
GRAPH.QUERY Companies "CREATE (:Individual {name: 'Z'})"

GRAPH.QUERY Companies "CREATE (:Company {name: 'A'})"
GRAPH.QUERY Companies "CREATE (:Company {name: 'B'})"

You’ll notice here that the way we are defining nodes is a little different. A node follows the structure (alias:type {properties}). The alias is not much use in such CREATE commands, but on the other hand, the type now (unlike in the earlier example) gives us a way to distinguish between different kinds of nodes.

Now that we have the nodes, we can create the relationships:

GRAPH.QUERY Companies "MATCH (x:Individual { name : 'X' }), (c:Company { name : 'A' }) CREATE (x)-[:owns {percentage: 85}]->(c)"
GRAPH.QUERY Companies "MATCH (x:Individual { name : 'Y' }), (c:Company { name : 'A' }) CREATE (x)-[:owns {percentage: 15}]->(c)"
GRAPH.QUERY Companies "MATCH (x:Individual { name : 'Y' }), (c:Company { name : 'B' }) CREATE (x)-[:owns {percentage: 55}]->(c)"
GRAPH.QUERY Companies "MATCH (x:Individual { name : 'Z' }), (c:Company { name : 'B' }) CREATE (x)-[:owns {percentage: 45}]->(c)"

In order to make sure we apply the relationships to existing nodes (as opposed to creating new ones), we first find the nodes we want with a MATCH clause, and then CREATE the relationship between them. You’ll notice that our relationships now also have properties.

Now that our graph is set up, we can start querying it! Here are a few things we can do with it.

Return the names of all the nodes:

GRAPH.QUERY Companies "MATCH (x) RETURN x.name"
1) 1) "x.name"
2) 1) 1) "X"
   2) 1) "Y"
   3) 1) "Z"
   4) 1) "A"
   5) 1) "B"
3) 1) "Query internal execution time: 0.606600 milliseconds"

Return the names only of the companies:

GRAPH.QUERY Companies "MATCH (c:Company) RETURN c.name"
1) 1) "c.name"
2) 1) 1) "A"
   2) 1) "B"
3) 1) "Query internal execution time: 0.515959 milliseconds"

Return individual ownership in each company (separate fields):

GRAPH.QUERY Companies "MATCH (i)-[s]->(c) RETURN i.name, s.percentage, c.name"
1) 1) "i.name"
   2) "s.percentage"
   3) "c.name"
2) 1) 1) "X"
      2) (integer) 85
      3) "A"
   2) 1) "Y"
      2) (integer) 15
      3) "A"
   3) 1) "Y"
      2) (integer) 55
      3) "B"
   4) 1) "Z"
      2) (integer) 45
      3) "B"
3) 1) "Query internal execution time: 1.627741 milliseconds"

Return individual ownership in each company (concatenated strings):

GRAPH.QUERY Companies "MATCH (i)-[s]->(c) RETURN i.name + ' owns ' + round(s.percentage) + '% of ' + c.name"
1) 1) "i.name + ' owns ' + round(s.percentage) + '% of ' + c.name"
2) 1) 1) "X owns 85% of A"
   2) 1) "Y owns 15% of A"
   3) 1) "Y owns 55% of B"
   4) 1) "Z owns 45% of B"
3) 1) "Query internal execution time: 1.281184 milliseconds"

Find out who owns at least 50% of the shares in Company A:

GRAPH.QUERY Companies "MATCH (i)-[s]->(c) WHERE s.percentage >= 50 AND c.name = 'A' RETURN i.name"
1) 1) "i.name"
2) 1) 1) "X"
3) 1) "Query internal execution time: 1.321579 milliseconds"

Wrapping Up

In this article, we’ve seen how to:

get up and running with RedisGraph
create simple graphs
perform basic queries

We’ve obviously scratched the surface of RedisGraph and Cypher, but hopefully these examples will help others who, like me, are new to this space.

An Example Family Tree

Loading Data in RedisGraph

Querying the Family Tree

Statistical Queries

Wrapping Up

Getting Started

Tom Loves Judy

Company Shareholding

Wrapping Up

"You don't learn to walk by following rules. You learn by doing, and by falling over." — Richard Branson